Product Description
In the manufacture of washing machine motor, you need to use the shaft press. The shaft press presses the shaft into the rotor. The effect of the closing shaft affects the running phase rate of the washing machine motor after assembly. If the central shaft is cheap, the motor will run abnormally.
The following is the introduction of the shaft press we use:
1. The fuselage adopts C-type fuselage structure, and the hydraulic station adopts built-in structure. The structure design of the equipment is reasonable, and it has sufficient stiffness and stability;
2. The indenter is placed in the middle of the body, its upper plane is connected with the main cylinder, the lower plane of the indenter is provided with a standard T-slot, and the return position of the cylinder can be set;
3. The upper indenter is guided by chrome-plated shaft and graphite copper sleeve, and the lower table is equipped with a turnover table;
4. The upper part of the equipment is provided with a lifting hole;
5. The hydraulic pipeline of the press is connected with a bushing/H-type hose to ensure sealing;
6. The hydraulic system adopts high quality solenoid valve and necessary safety valve, support valve, etc., the system has compact structure, small internal leakage, fast response, sensitive and reliable action, strong anti-pollution ability, small liquid flow resistance, easy maintenance;
7. The press pressure can be adjusted, the pipeline layout of the whole machine is reasonable and beautiful, and all the tubing are welded after welding slag, deburring treatment to ensure the hydraulic pipeline clean;
8. The press electrical monitoring system adopts touch screen display and setting, which can adjust the stroke and pressure of the slider on the screen and display the displacement and pressure of the slider. Can display press working information and fault information.