Washing Machine Spin Motor In India

Introduce our continuous dipping machine, which is used in the production of stator parts of washing machine motors. Before assembling the washing machine motor, the stator parts need to be dipped in paint. Its purpose is to prevent rust as well as to fix the coil. The washing machine motor after dipping can effectively improve the life and prevent leakage. 

Here is a detailed introduction to the motor dipping machine we use:

In order to ensure the normal operation of the motor and electrical appliances, the motor winding and electrical coil must be dipped in paint to enhance the insulation performance and mechanical strength of the winding and coil, so the insulation treatment is the key process of the motor and electrical manufacturing.

Vacuum continuous immersion machine is designed and manufactured on the basis of digesting and absorbing foreign advanced technology, fully investigating and introducing prototypes, and combining with China's national conditions. Through practical use, the main technical indicators and performance have reached the advanced level of the introduction of the prototype, which provides reliable advanced equipment for the production flow and technical transformation of the domestic motor and electrical industry.

Vacuum continuous dip paint dryer

Usage: The equipment is mainly used for motor with center height below 160, household appliance motor, micro motor. Fractional horsepower motors, power tools, ballasts, reactors and other electrical coils, small transformers and other automatic vacuum impregnation and drying treatment

Advantages:

1. Good penetration, thorough impregnation, reduce energy consumption and equipment investment

2. The dip and bake treatment cycle is greatly shortened, the whole process only takes a few hours, and the efficiency is increased by 2-4 times

3. Power saving 30-50%

4. Solvent-free paint can improve the filling rate of insulated coils

5. The paint film on the surface of the coil after dipping is generally no more than 0.02mm, there is no need to scrape and drop paint, and the surface of the iron core is protected by insulating paint, which has good anti-rust performance

6. Because of the automatic control of the whole process, the stability of the process parameters is strictly guaranteed, so as to stabilize the product quality

7. Continuous immersion Most of the use of single-layer dipping, lead can not be immersed in paint, to avoid hardening, brittle after dipping, affecting the assembly and quality